Draft Bench
Draw wall outlines with OFFSET in AutoCAD LT

Open Practice-before.dwg in Model space. The drawing uses millimetres.
The cyan outside wall face is a closed 6000 x 4000 mm polyline.

1. Run OFFSET and enter 150 for the distance. If the command says
   "Erase source = Yes", choose Erase, then No before entering 150.
2. Select the cyan outline, click inside it, and press Enter to finish.
3. Check that the new polyline is closed. Use DIST across each side to
   confirm it measures 5700 x 3700 mm. The wall faces are 150 mm apart.
4. Compare with Practice-after.dwg. We coloured the inside face yellow
   so the two polylines are easy to tell apart in the video.

We tested the exercise in AutoCAD LT 2027 for Windows.
Both drawings use the DWG 2018 file format.
